Market orders: filled now, at whatever the book offers
A market order buys or sells immediately against the best orders resting in the book. It is the only order type that puts execution ahead of price: it fills at once, the price is whatever the book offers, and every fill pays the taker fee. Use it when being in or out of the position matters more than the exact price.
The price paid is an average across the levels the order consumes. Suppose the ask side shows 0.4 BTC at $60,000, 0.3 BTC at $60,010 and 0.3 BTC at $60,030. A market buy of 1 BTC takes all three and pays $60,012 on average, $12 or 0.02% above the best ask. A larger order, or a thinner book, walks further. That gap is slippage, and it is a cost on top of the fee.
Some exchanges cap how far a market order may travel, by converting it to a limit order a set percentage from the current price. On those venues a market order can be left partly unfilled in a fast move. The rule is in each exchange’s trading rules.
Limit orders: your price or better, with no promise of a fill
A limit order sets the worst price you accept: a buy fills at the limit price or lower, a sell at the limit price or higher. The price is guaranteed and the fill is not. If the market never reaches the price the order stays in the book, and if it reaches it briefly the order may fill only in part.
Whether a limit order pays the maker or the taker fee depends on what it does when it arrives. A buy limit placed below the best ask rests in the book and pays the maker fee when someone trades against it. A buy limit placed at or above the best ask executes at once against resting orders and pays the taker fee, like a market order with a price cap. The full rule is in the guide to maker vs taker fees.
A limit order priced through the book is a useful tool in its own right. A buy limit at $60,020 into the book above would fill 0.7 BTC at $60,000 and $60,010 and leave the remaining 0.3 BTC resting at $60,020, instead of paying $60,030 for it.
Stop orders: stop-market and stop-limit
A stop order stays inactive until the market reaches a trigger price, and then releases a second order. A stop-market releases a market order, so it will fill but at an unknown price. A stop-limit releases a limit order, so the price is capped but the order can be left unfilled while the market keeps moving.
Take a 0.5 BTC long opened at $60,000 with a stop at $58,000. If the stop fills exactly at the trigger, the loss is $1,000 before fees. In a fast fall a stop-market might fill at $57,700 instead, a loss of $1,150, or $150 more than planned. A stop-limit with a limit of $57,900 would not fill at all if the price jumps from $58,050 to $57,700, and at $56,500 the open position is showing a loss of $1,750.
The trigger is not the fill, and the trigger itself can be set to the last price or the mark price on most derivatives exchanges. How the two differ, and what that does to a stop in a wick, is covered in mark price vs last price. A stop that releases a market order pays the taker fee.
Take-profit and trailing stop orders
A take-profit order is a trigger order placed on the winning side of a position: it closes the position, or part of it, when the price reaches a target. A trailing stop is a stop whose trigger follows the price at a fixed distance when the market moves in your favour and stays where it is when the market moves against you.
With a 2% trailing distance on a long opened at $60,000, the trigger starts at $58,800. If the price climbs to $63,000 the trigger rises to $61,740 and stays there when the price turns. A fill at that level on 0.5 BTC closes the trade $870 ahead before fees, instead of at a loss. The fill is still a market order released into a falling book, so the result can be lower.
Many exchanges let you attach a take-profit and a stop-loss to a position or to the entry order, so that when one fills the other is cancelled. Check whether the attached orders cover the whole position or a fixed quantity, because the two behave differently after you add to the position.
Post-only: a limit order that can only be a maker
Post-only is a condition on a limit order: the order may only enter the book as a resting order. If it would execute immediately against an order already there, the exchange cancels it, or on some venues moves it to the nearest price at which it can rest. A post-only order therefore never pays the taker fee.
It exists because a limit order placed close to the market can cross the spread by accident and be charged as a taker. On a $30,000 position, a maker fee of 0.02% is $6 and a taker fee of 0.055% is $16.50. Across the 9 exchanges AffMiss compares, the published base-tier rates on perpetual futures run from 0.01% to 0.02% for makers and from 0.035% to 0.06% for takers.
The price of that certainty is that the order may not be accepted, or may not fill. Post-only is the wrong instruction for an exit that has to happen.
Reduce-only: an order that cannot open or grow a position
Reduce-only is a condition on a derivatives order: it may only make an existing position smaller. If filling it would increase the position or flip it to the other side, the exchange trims the order to the size of the position or cancels it. Exits such as stop-losses and take-profits are normally sent as reduce-only for that reason.
Consider a 0.5 BTC long protected by a 0.5 BTC sell stop. You close 0.3 BTC by hand and leave 0.2 BTC open. Without reduce-only, a triggered stop sells 0.5 BTC: it closes the 0.2 BTC and opens a 0.3 BTC short you did not intend, with its own margin and liquidation price. With reduce-only, the stop sells 0.2 BTC and ends flat.
Reduce-only belongs to futures and options, where positions have a direction. On spot there is no position to flip: a sell order cannot exceed the balance you hold.
Time in force: GTC, IOC and FOK
Time in force tells the exchange how long an order stays alive and what to do with the part that cannot fill at once. Good-till-cancelled is the default on most order tickets. Immediate-or-cancel and fill-or-kill are for orders that should execute now, at a capped price, or not remain in the book at all.
- GTC (good-till-cancelled): rests in the book until it fills or you cancel it. The unfilled part can earn the maker fee.
- IOC (immediate-or-cancel): fills whatever it can at once at the limit price or better, and cancels the rest. Every fill is a taker fill.
- FOK (fill-or-kill): fills in full at once or is cancelled entirely. No partial fills, and it is always a taker.
- Post-only is offered as a time-in-force option on some order tickets and as a separate checkbox on others. It does the same thing in both places.
Which order types pay the maker fee and which the taker fee
The fee follows what the order does, not what it is called. An order that rests in the book first pays the maker fee; an order that executes on arrival pays the taker fee. On a $10,000 position at the published base-tier rates of the 9 exchanges AffMiss compares, a round trip of two taker fills costs between $7 and $12, and a round trip of two maker fills between $2 and $4.
A common pattern is to enter with a resting limit order and leave the exit to a stop-market, which means one maker fill and one taker fill. The rates for each venue are in the ranking of crypto futures exchanges by published fees, and the futures fee calculator prices any mix of the two.
- Market order: taker.
- Limit order that rests and fills later: maker.
- Limit order that fills on arrival, including IOC and FOK: taker.
- Post-only limit order: maker, or not accepted.
- Stop-market, take-profit market and trailing stop: taker once triggered.
- Stop-limit: taker if the limit order fills at once after the trigger, maker if it rests first.
- Reduce-only: no effect on the fee. It follows the order it is attached to.
Choosing an order type for common situations
Choose by asking which of two things you cannot give up: the fill or the price. If the trade has to happen, use an order that executes and accept the taker fee and the slippage. If the price has to hold, use a limit order and accept that it may not fill. No order type removes the risk of a leveraged position; it decides which uncertainty you carry.
- Entering without urgency: a limit order, post-only if the maker fee matters to the plan.
- Entering a move already under way: a market order, or a limit order priced a little through the book to cap the price.
- Protective exit on a leveraged position: a reduce-only stop-market, placed well before the liquidation price.
- Exit at a target: a reduce-only limit order resting at the target, which pays the maker fee.
- Large order in a thin market: several limit orders, rather than one market order that walks the book.
- Sizing the trade before any of this: the position size calculator works back from the stop distance.
Where to go next
Common questions
A market order fills immediately at the best prices available and does not control the price. A limit order fills only at the price you set or better and may not fill at all. Market orders always pay the taker fee; limit orders pay the maker fee when they rest in the book first.
It can be either. A stop-market releases a market order when the trigger price is reached, so it fills at whatever the book offers. A stop-limit releases a limit order, which caps the price and can be left unfilled if the market moves past it.
Post-only is an instruction that a limit order may only rest in the order book. If it would trade immediately, the exchange cancels or reprices it. The order can therefore only ever be charged the maker fee.
Reduce-only means the order can only make an open derivatives position smaller. It cannot open a new position or flip a long into a short. It is used for stop-losses and take-profits so that an exit never becomes an unintended entry.
No. The trigger price starts the order; the fill happens afterwards. A stop-market fills at the prices available in the book, which in a fast market can be worse than the trigger. A stop-limit protects the price and can fail to fill.
Both are limit orders that do not stay in the book. Immediate-or-cancel fills as much as it can at once and cancels the remainder. Fill-or-kill fills completely at once or is cancelled in full. Both pay the taker fee on what they fill.
This guide explains how a product works. It is not financial advice. Leveraged crypto products can lose your entire margin. Read the risk warning.
Bybit
OKX
Bitget
KuCoin
Binance
Deribit
Phemex
MEXC
BingX